Product Details:
Payment & Shipping Terms:
|
Application: | Wood Crusher Machine | Using: | Wood Crush |
---|---|---|---|
Product: | Sawdust | Raw Material: | Wood Chip |
Color: | Green/Customized | Factory: | Zhengzhou Tianci Heavy Industry Machinery Co Ltd |
Warranty: | 12 Months | Speed: | 2800r/min |
High Light: | fertilizer dryer,rotary drum dryer |
Wood Crusher Machine Wood Chip Crusher Machine Wood Sawdust Shredder Crusher
Introduction of the wood crusher
This series of wood crusher have advantage of compact structure, Strong and durable, Safe and reliable, easy operation, lower noise and vibration, high efficiency and low energy consumption, etc. With double discharge to connect material and convenience to use, the spare part of the machine completely adopt quality material, outsourcing parts adopting domestic optimal product, the whole machine’s quality is reliable, long-lived.
Features of wood crusher
1.The biomass hammer mill shell is welded by steel plate,the site in the crush room, which connects to the materials andall use the wearable and commutative parts and double wear plate.
2.Coarse and fine power can both be achieved by adjusting the gaps between hammer and the screen by changing the location of the pin rod.
3.The motor and rotor are installed in the same heavy-duty base,using coupling direct drive,the rotor are checked by dynamic balance,and can work forward and reverse,the hammers are arranged symmetrically.
Working principle of wood crusher
This biomass hammer mill is mainly component of casing, rotor, hammers and bars. The case is divided into two parts: up and down, which is connected by welding the cut steel; other parts are connected by screws. The one inside of case is high manganese steel lining board, which is easy to change when wore out. There are several hammers in the spindle, which make up of rotor together with turntable and wear hammer shaft. It works through motor and V-belt to drive spindle and rotor rotating, so that centrifugal force producing by the hammer rotating spread out. Then when the big material was put into crushing chamber, it was crush by the high speed hammer. Afer those process, the standard material was screen out by down bar and non-standard one was left on the crushing chamber and crush again. In order to avoid clogging, humidity of crushed material should below 10%-15%.
Parameter of wood crusher
Model | Power | Outlet dia | Hammer size | Capacity |
500 | 18.5kw | 500*250 | 6mm | 0.5-1t/h |
600 | 22kw | 630*300 | 8mm | 1-1.5t/h |
800 | 37kw | 800*350 | 8mm | 1.5-2.5t/h |
1000 | 45kw | 1000*500 | 8mm | 3-5t/h |
1300 | 55kw*2 | 1300*600 | 10mm | 6-8t/h |
1600 | 75kw*2 | 1600*650 | 10mm | 8-12t/h |
Picture of wood crusher
Contact Person: admin
Tel: +8618538528502