ZHENGZHOU SHENGHONG HEAVY INDUSTRY TECHNOLOGY CO., LTD. sales@gcfertilizergranulator.com 86--15286833220
Most buyers who ask for an affordable fertilizer production line are not looking for cheap equipment. They are looking for a line whose cost matches the tonnage they can actually sell in the first two years. Overbuilding is the most common way to lose money on a fertilizer plant: a 15 ton per hour line running at 3 tons per hour burns the same electricity, the same floor space and the same operator wages as it would at full rate, but produces a fifth of the revenue.
The practical route to an affordable line is a narrow starting scope, a correctly sized disc granulator, and a design that allows a second stage to be added later without moving the first one.
Granulation sets the size of every other machine downstream. On the SHQ disc pan granulator range, pan diameter defines output, and the four standard models cover the whole small to mid range:
| Model | Capacity | Disc diameter | Motor power | Weight | Granule size |
|---|---|---|---|---|---|
| SHQ-1500 | 1-2 t/h | 1500 mm | 7.5 kW | 1.6 t | 1-4 mm |
| SHQ-2000 | 2-3 t/h | 2000 mm | 11 kW | 2.2 t | 1-4 mm |
| SHQ-2500 | 3-4 t/h | 2500 mm | 15 kW | 3.1 t | 2-5 mm |
| SHQ-3000 | 4-6 t/h | 3000 mm | 18.5 kW | 4.0 t | 2-5 mm |
A buyer entering a regional market usually starts at SHQ-1500 or SHQ-2000. Both run on 380V / 50Hz or a customized voltage, quote a 93 percent ball shape rate, accept feed material at 18 to 25 percent moisture, and discharge at roughly 30 to 40 percent moisture for drying. The disc angle is adjustable between 45 and 55 degrees on all models, so the same machine serves several granule size specifications without a parts change.
The SHQ range is built in carbon steel with an SS304 pan available as an option. If your raw material is neutral compost or NPK powder, a carbon steel pan is sufficient. If you process acidic or high humidity material, specify the SS304 pan and keep the rest of the frame in carbon steel. Paying for stainless steel on the frame is the most common unnecessary cost in a small plant.
A single deck splitting product from recycle covers most 1 to 6 ton per hour plants. A second deck for fine dust is only needed when your finished product specification has a hard lower size limit.
Packing is the easiest station to upgrade in a second phase. Starting with a semi-automatic bagging station keeps the initial investment low, and the conveyor layout does not change when you move to an automatic weigher.
Because the pan discharges at 30 to 40 percent moisture, the dryer is sized by kilograms of water to evaporate per hour. A dryer correctly sized on water load runs at a moderate temperature, produces a granule with even hardness, and uses less fuel than an oversized unit throttled back.
A well planned small line expands by adding parallel capacity, not by replacing equipment. Because pan diameter defines the footprint, leaving one clear bay beside the first disc lets you add a second SHQ unit and share the crusher, mixer, dryer and packing station. Buyers who plan this way typically double output for less than the cost of a second complete line.
Zhengzhou Shenghong Heavy Industry has manufactured fertilizer equipment since 2003 and holds ISO 9001, CE, SGS and BV certification on the SHQ range. Minimum order quantity is one set, standard delivery is 15 working days after deposit, supply ability is 80 sets per month, and every machine carries a 12 month warranty with engineer-supervised installation. Payment terms include T/T, L/C, D/A, D/P, Western Union and , which matters when a buyer is financing a first line.
Tell us your raw material, the tonnage you can sell each month, and your granule size target. We will propose a starter configuration and show exactly which stations can wait for phase two.