logo

ZHENGZHOU SHENGHONG HEAVY INDUSTRY TECHNOLOGY CO., LTD. sales@gcfertilizergranulator.com 86--15286833220

ZHENGZHOU SHENGHONG HEAVY INDUSTRY TECHNOLOGY CO., LTD. Company Profile
blog
Home > blog >
Company news about Disk Pelletizing Production Line: How a Rotating Disc Turns Powder into Uniform Fertilizer Granules

Disk Pelletizing Production Line: How a Rotating Disc Turns Powder into Uniform Fertilizer Granules

2026-10-26
Latest company news about Disk Pelletizing Production Line: How a Rotating Disc Turns Powder into Uniform Fertilizer Granules

A disk pelletizing production line turns fine, powdery organic or compound fertilizer material into uniform round granules using a rotating inclined disc as the pelletizing heart of the plant. Compared with pressure-based granulation, the disc route is a wet granulation method: material is moistened, tumbled and layered until balls form, then dried, screened and bagged. For producers who want a simple, controllable process, it remains one of the most practical ways to make ball shape fertilizer at 0.3 to 6 tons per hour.

This article explains how a disk pelletizing line is configured, what each stage does, which parameters really decide granule quality, and how to match line capacity to the disc pan granulator models Shenghong supplies.

What Disk Pelletizing Actually Does

The word pelletizing is often used loosely in the fertilizer industry. On a disc line, granulation happens by agglomeration, not by extrusion or compression. Fine particles are wetted to a narrow moisture band, then rolled against a rotating disc. Small nuclei stick together, and as the disc turns, successive layers of powder and moisture build up around them until the ball reaches the target size and rolls out over the rim of the pan.

That mechanism explains three things buyers notice immediately: granules are ball shape rather than cylindrical, the surface is smooth and rounded, and the process tolerates a wide range of organic raw materials such as poultry manure, cow dung, compost and humic acid, as well as NPK blends.

Why the pan angle matters

The inclination of the disc sets how long material stays inside the pan. A steeper pan shortens residence time and produces smaller granules; a flatter pan keeps material rolling longer and builds larger balls. Shenghong SHQ disc pan granulators use an adjustable pan angle of 35 to 55 degrees, so one machine can be tuned on site for different recipes and target sizes instead of being locked to a single product.

The moisture window

Water is the binding agent. Feed material is normally conditioned to roughly 20% moisture before granulation, and the granulated balls leave the pan at about 30% to 40% moisture, which is why a dryer is part of the line rather than an optional extra. Too dry and the nuclei never form; too wet and the pan turns into a paste mixer.

Line Configuration: From Powder to Bagged Granules

A complete disk pelletizing production line is a chain of relatively simple machines. The exact configuration depends on raw material and target capacity, but the standard sequence looks like this:

StageEquipmentFunction
1. Raw material preparationForklift hopper, belt conveyor (B500 / B600 / B800)Receives and transfers manure, compost or blended powder into the process
2. CrushingFertilizer crushing machine (500-8,000 kg/h)Breaks caked or lumpy material to a consistent fine powder
3. Batching and mixingMulti-material batching system, horizontal ribbon mixer (SH600x1200 to SH1500x3000)Blends recipe components and evens out moisture before granulation
4. GranulationSHQ disc pan granulator (SHQ-20 to SHQ-45)Builds ball shape granules at 93% granulation rate
5. DryingRotary drum dryer (SHG8800 / SHG10100 / SHG12120)Reduces granule moisture to a safe storage level
6. ScreeningRotary screener (1.0x3.0 to 2.0x8.0 m)Separates finished granules from oversize and fines
7. Coating (optional)Drum coater (1000x3000 to 1800x8000 mm)Applies anti-caking or nutrient coating
8. PackingAutomatic packer BLD-K50/SFills 10-50 kg bags for retail or bulk shipment

Rejected oversize granules are normally crushed and returned to the pan, and fines go back to mixing. A well-balanced line therefore runs with very little waste, and the only real consumable is water.

The Disc Pan Granulator: Core Specifications

Everything upstream exists to feed the disc properly, and everything downstream exists to finish what the disc produces. These are the verified specifications of the SHQ pan type granulator range:

ParameterSpecification
Model seriesSHQ (SHQ-20 / SHQ-25 / SHQ-28 / SHQ-30 / SHQ-32 / SHQ-36 / SHQ-45)
Capacity0.3 - 6 ton/hour across the range
Granulation rate93%
Granule shapeBall shape
Granule size2 - 6 mm (typical disc line output)
Pan angle35 - 55 degrees, adjustable
Machine materialCarbon steel
Voltage380V
Warranty12 months
CertificationBV, SGS, ISO
MOQ / delivery1 set / 15 days

Pan diameter grows from the SHQ-20 to the SHQ-45, and capacity grows with it. A buyer targeting 0.5-1 t/h should not order the largest pan and run it half empty; matching pan size to the duty point is what keeps granule size stable and power consumption sane.

Getting Stable Granule Size: Five Operating Levers

  • Pan angle - the primary size control. Small adjustments change residence time noticeably.
  • Disc speed - faster rotation throws material higher and tends to reduce ball size.
  • Water addition rate - the most sensitive variable; add in small increments, never in one shot.
  • Feed consistency - a crusher upstream is not optional if incoming material varies in lump size.
  • Return fines ratio - a healthy recycle layer acts as seed material and stabilises the ball bed.

Operators usually find a working point within the first shifts and then record it per recipe. Because the pan is open and visible, the process can be judged by eye.

Where a Disk Pelletizing Line Fits Best

Disc lines are strongest in three situations. First, organic and bio-organic fertilizer production from manure or compost, where the rounded ball shape and gentle agglomeration suit fibrous raw materials. Second, small to medium plants that need a robust line with low maintenance and predictable spare parts. Third, multi-recipe plants that switch products seasonally and need one granulator to handle several formulations.

Where they are not the best answer: very high tonnage single-product plants, or formulations that demand a perfectly uniform cylindrical pellet. In those cases a rotary drum or double roller extrusion line is the better fit, and we say so honestly during selection.

Line Integration and Support

A disc pan granulator is a single machine; a production line is a system. Shenghong supplies the complete chain - conveyors, crusher, batching, mixer, SHQ disc granulator, SHG dryer, screener, coater and BLD-K50/S packer - engineered around the customer's raw material analysis and target output, with 380V configuration, BV/SGS/ISO certification and a 12-month warranty. Standard delivery is 15 days for a single machine, and engineer-guided installation is available for full lines.

If you are planning a ball shape fertilizer plant, send us your raw material and target capacity through fertilizer-productionline.com and we will propose a matching disc pelletizing configuration rather than a generic quotation.

Events
Contacts
Contacts: Miss. Judy
Fax: 86-371-64865777
Contact Now
Mail Us