logo

ZHENGZHOU SHENGHONG HEAVY INDUSTRY TECHNOLOGY CO., LTD. sales@gcfertilizergranulator.com 86--15286833220

ZHENGZHOU SHENGHONG HEAVY INDUSTRY TECHNOLOGY CO., LTD. Company Profile
blog
Home > blog >
Company news about Dry Granulation Production Line: SDZ Series Roller Extrusion System for No-Drying Fertilizer Plants

Dry Granulation Production Line: SDZ Series Roller Extrusion System for No-Drying Fertilizer Plants

2026-09-07
Latest company news about Dry Granulation Production Line: SDZ Series Roller Extrusion System for No-Drying Fertilizer Plants

What Is a Dry Granulation Production Line?

A dry granulation production line is a complete fertilizer processing system that turns powdered raw materials into uniform granules by mechanical compression, without adding water, binders, or heat. At the core of the line is the SDZ series roller extrusion granulator, which forms granules at room temperature in a single pass. For NPK compound fertilizer and blended fertilizer producers, this approach removes the dryer and cooler from the process entirely, cutting energy consumption, equipment investment, and workshop floor space at the same time.

How the Line Works

A complete dry granulation line integrates five stages around the SDZ granulator:

  • Precision batching: PLC-controlled batching systems with belt scales maintain accurate NPK nutrient ratios.
  • Homogeneous mixing: High-efficiency mixers blend powders into a consistent feed with uniform nutrient distribution.
  • Roller extrusion granulation: Powder is squeezed between two counter-rotating rollers under high pressure into dense sheets or strips, which break into granules after demolding.
  • Crushing, shaping and screening: Granules fall into the crushing and shaping chamber, then pass through a screen; fines are recycled back to the mixer.
  • Automatic packaging: Bagging machines complete 20-50 kg packaging ready for warehousing.

Power is transmitted from the electric motor through a belt pulley and reducer to the two rollers. Because granulation happens at room temperature, no drying hall, hot-air furnace, or cooling system is needed anywhere in the line.

SDZ Series Technical Specifications

ModelCapacity (t/h)Power (kW)Overall Dimensions (mm)
SDZ-I-1.01 - 1.5111420 × 750 × 1310
SDZ-I-2.01.5 - 2.518.51570 × 920 × 1450
SDZ-I-3.02.5 - 3.5221750 × 870 × 1530
SDZ-I-4.03.5 - 4.5451900 × 1050 × 1680
SDZ-II-1.01 - 2151340 × 930 × 1310
SDZ-II-2.01.5 - 2.518.51750 × 870 × 1530
SDZ-II-3.02.5 - 3.5221900 × 1050 × 1680

Note: Rotation speed is adjustable to suit different material characteristics.

Economic Advantages of the No-Drying Process

  • Lower energy cost: Drying normally consumes the largest share of fuel and electricity in a wet granulation plant; the dry line eliminates this stage completely.
  • Reduced additive consumption: Raw materials are formed directly, minimizing binder and auxiliary material usage.
  • Up to 95% granulation rate: Less dust and off-spec material means less recycling and lower product loss.
  • Compact workshop: The smallest model, SDZ-I-1.0, occupies just 1420 × 750 × 1310 mm, and the whole line fits a much smaller building than a wet process of equal capacity.
  • Simplified operation: Fewer machines, fewer operators, and easier maintenance keep running costs predictable.

Materials the Line Can Process

The SDZ series granulates compound and blended fertilizers, ammonium chloride, ammonium sulfate, organic-inorganic compound fertilizers, pharmaceutical ingredients, feed additives, chemical powders, rare earth compounds, metallurgical auxiliaries, coal fines, biological agents, and environmental protection materials. Rotation speed is adjustable, allowing operators to match the compression process to each material's characteristics.

Choosing the Right Line Capacity

For pilot or small plants producing 10-20 tons per day, SDZ-I-1.0 or SDZ-II-1.0 provides an economical starting point. Medium-scale producers typically choose SDZ-I-2.0 or SDZ-I-3.0 for 1.5-3.5 t/h throughput, while large operations select SDZ-I-4.0 for up to 4.5 t/h. Our engineers can recommend the right configuration based on your raw materials, target granule size, and daily output.

Contact Us

For more information or a customized quotation for a dry granulation production line, contact the sales team of Zhengzhou Shenghong Heavy Industry Technology Co., Ltd. We are ready to support your fertilizer production needs.

Events
Contacts
Contacts: Miss. Judy
Fax: 86-371-64865777
Contact Now
Mail Us