logo

ZHENGZHOU SHENGHONG HEAVY INDUSTRY TECHNOLOGY CO., LTD. sales@gcfertilizergranulator.com 86--15286833220

ZHENGZHOU SHENGHONG HEAVY INDUSTRY TECHNOLOGY CO., LTD. Company Profile
blog
Home > blog >
Company news about Mechanical Granulation Line: SDZ Series Roller Extrusion for No-Drying Fertilizer Production

Mechanical Granulation Line: SDZ Series Roller Extrusion for No-Drying Fertilizer Production

2026-09-14
Latest company news about Mechanical Granulation Line: SDZ Series Roller Extrusion for No-Drying Fertilizer Production

What Is a Mechanical Granulation Line?

A mechanical granulation line is a complete fertilizer processing system that forms granules from dry powder using physical force rather than water, steam, or chemical binders. Instead of building granules in a rotating drum or pan with added moisture, the line compresses powder between two counter-rotating rollers under high pressure at room temperature. The compressed material is then crushed, shaped, and screened into uniform, nearly ball-shaped granules. For compound and blended fertilizer producers, this mechanical route removes the drying and cooling stages altogether and turns a powdered formula into a stable, marketable granule in a single pass through the SDZ series roller extrusion granulator.

How Mechanical Granulation Works

A complete mechanical granulation line integrates five stages around the SDZ series granulator:

  • Precision batching: PLC-controlled batching with belt scales maintains accurate NPK nutrient ratios before granulation.
  • Homogeneous mixing: High-efficiency mixers blend the powders into a consistent feed with uniform nutrient distribution.
  • Roller extrusion granulation: The mixed powder is squeezed between two counter-rotating rollers under high pressure into dense sheets or strips.
  • Crushing, shaping and screening: The sheets break into granules in the crushing and shaping chamber, then pass through a screen; oversize and fines are recycled back to the mixer.
  • Automatic packaging: Bagging machines complete 20-50 kg packaging ready for warehousing.

Power is transmitted from the electric motor through a belt pulley and reducer to the two rollers. Because the granule is formed by mechanical compaction at room temperature, no drying hall, hot-air furnace, or cooling system is required anywhere in the line.

SDZ Series Technical Specifications

ModelCapacity (t/h)Power (kW)Overall Dimensions (mm)
SDZ-I-1.01 - 1.5111420 × 750 × 1310
SDZ-I-2.01.5 - 2.518.51570 × 920 × 1450
SDZ-I-3.02.5 - 3.5221750 × 870 × 1530
SDZ-I-4.03.5 - 4.5451900 × 1050 × 1680
SDZ-II-1.01 - 2151340 × 930 × 1310
SDZ-II-2.01.5 - 2.518.51750 × 870 × 1530
SDZ-II-3.02.5 - 3.5221900 × 1050 × 1680

Note: Rotation speed is adjustable to suit different material characteristics.

Advantages of Mechanical Granulation

  • No drying, no steam: Mechanical compaction removes the dryer, cooler, and hot-air furnace from the process, cutting both equipment investment and daily fuel consumption.
  • Nutrient integrity: Without heat or added water, the full NPK analysis of the formula is preserved inside every granule.
  • High granulation rate: The forming and screening circuit reaches a granulation rate of up to 95%, so less material is recycled and product loss stays low.
  • Adjustable forming: Roller rotation speed is adjustable, letting one line run different formulations and material characteristics.
  • Compact footprint: The smallest model, SDZ-I-1.0, occupies just 1420 × 750 × 1310 mm, so the whole line fits a much smaller workshop than a wet process of equal capacity.
  • Simple operation: Fewer machines and fewer moving parts mean fewer operators and easier maintenance.

Materials a Mechanical Granulation Line Can Process

The SDZ series mechanically granulates compound and blended fertilizers, ammonium chloride, ammonium sulfate, and organic-inorganic compound fertilizers, as well as pharmaceutical ingredients, feed additives, chemical powders, rare earth compounds, metallurgical auxiliaries, coal fines, biological agents, and environmental protection materials. Because rotation speed is adjustable, operators can match the compaction process to each material's characteristics.

Choosing the Right Mechanical Granulation Line

For pilot or small plants, SDZ-I-1.0 or SDZ-II-1.0 is an economical starting point. Medium-scale producers typically select SDZ-I-2.0 or SDZ-I-3.0 for 1.5-3.5 t/h throughput, while larger operations choose SDZ-I-4.0 for up to 4.5 t/h. Granule size is commonly adjustable within roughly 3-8 mm, with 2.8-4 mm being the mainstream range for fertilizer products. Our engineers can recommend the right configuration based on your raw materials, target granule size, and daily output.

Contact Us

For more information or a customized quotation for a mechanical granulation line, contact the sales team of Zhengzhou Shenghong Heavy Industry Technology Co., Ltd. We are ready to support your fertilizer production needs.

Events
Contacts
Contacts: Miss. Judy
Fax: 86-371-64865777
Contact Now
Mail Us