ZHENGZHOU SHENGHONG HEAVY INDUSTRY TECHNOLOGY CO., LTD. sales@gcfertilizergranulator.com 86--15286833220
Most fertilizer entrepreneurs do not start with a 20 ton per hour factory. They start with a farm, a manure supply, a local dealer network and a modest budget - and they need a plant that produces saleable granules from day one without a building full of idle equipment. That is exactly the segment a small scale fertilizer making plant is designed for, and the disc pan granulator route is the most common way to build one.
This article sets out what a small scale plant really looks like in the 0.3 to 2 ton per hour range: the equipment that is genuinely necessary, the stages that can be simplified or deferred, and the parameters that should never be compromised.
In fertilizer equipment terms, small scale usually means an output between roughly 0.3 and 2 tons per hour. At the low end, a single disc pan granulator with a simple dryer and manual bagging is enough. At the upper end of the band, the plant starts to look like a compact full line with crushing, mixing, drying, screening and automatic packing.
The important point is that small scale is not a scaled-down toy version of an industrial plant. It is the same process chemistry at a lower throughput, and the granulation parameters - moisture, pan angle, recycle ratio - matter just as much as they do at 20 t/h.
The following configuration is the standard skeleton we recommend for a small organic fertilizer plant. Every item below is a real, currently produced Shenghong machine, not a placeholder:
| Stage | Equipment | Verified specification |
|---|---|---|
| Crushing | Fertilizer crushing machine | 500 - 8,000 kg/h, 5.5 - 45 kW, stainless steel contact parts |
| Mixing | Horizontal ribbon mixer SH600x1200 | 1.5 - 2 t/h, 5.5 kW |
| Granulation | SHQ disc pan granulator | 0.3 - 6 t/h range, 93% granulation rate, pan angle 35-55 deg |
| Drying | Rotary drum dryer SHG8800 | Dries granules from 30-40% down to storage moisture |
| Screening | Rotary screener 1.0x3.0 m | Separates finished, oversize and fine fractions |
| Packing | Automatic packer BLD-K50/S | 10-50 kg bags, PLC controlled |
Conveyors are typically B500 or B600 belt conveyors at this scale. The whole line can be laid out on a footprint that fits an existing warehouse, which is often the deciding factor for a first-time producer.
A small plant should be lean, but lean is not the same as incomplete. Based on field experience with compact lines, this is the honest split:
A correctly set SHQ disc pan granulator delivers a 93% granulation rate with ball shape granules, typically in the 2-6 mm band for organic fertilizer. Pan angle is adjustable from 35 to 55 degrees, which lets a small producer switch between a finer granule for horticultural retail packs and a larger ball for field application without changing machinery.
The machine is built in carbon steel, runs on 380V, carries BV, SGS and ISO certification, and is covered by a 12-month warranty. For a first plant, that combination of simple mechanics and standard electrical specification matters more than advanced automation: it can be maintained by a local workshop, and it does not depend on imported control boards.
Two mistakes are common in first projects. The first is buying too small and discovering within a season that the dryer or the packer, not the granulator, is the bottleneck. The second is buying too large and running the disc at a fraction of its duty point, which makes granule size hard to control.
A cleaner approach is to size the granulator near the top of the intended band and keep the auxiliary equipment matched. Because the SHQ range covers 0.3 to 6 t/h with models from SHQ-20 to SHQ-45, a producer who starts at 1-2 t/h can later add a second pan, a larger dryer and an additional screener rather than replacing the whole plant. The building, the conveyors and the packing area are the parts worth over-sizing slightly at the start.
Standard terms for these machines are one set minimum order, negotiable pricing, payment by L/C, T/T, D/A or Western Union, and a 15-day delivery time for a single granulator, with complete lines scheduled according to configuration. Equipment ships in containers or wooden packages depending on the machine and the destination.
For a producer comparing suppliers, the useful questions are not only price per ton of capacity but also: what happens to granule size when the raw material moisture changes, how quickly can spare discs and screens be supplied, and who commissions the line. Those answers determine whether a small plant earns money in its first year.
Tell us your raw material (chicken manure, cow dung, compost, NPK blend or mixed organic waste), the granule size you want to sell, and your available building footprint. We will size a small scale fertilizer making plant around it - starting from a single SHQ disc pan granulator if that is genuinely all you need. Details and specifications: fertilizer-productionline.com.