logo

ZHENGZHOU SHENGHONG HEAVY INDUSTRY TECHNOLOGY CO., LTD. sales@gcfertilizergranulator.com 86--15286833220

ZHENGZHOU SHENGHONG HEAVY INDUSTRY TECHNOLOGY CO., LTD. Company Profile
News
Home > News >
Company news about 10,000 t/Year Organic Fertilizer Line: Equipment List, Capex and Payback Breakdown

10,000 t/Year Organic Fertilizer Line: Equipment List, Capex and Payback Breakdown

2026-11-17
Latest company news about 10,000 t/Year Organic Fertilizer Line: Equipment List, Capex and Payback Breakdown

Why 10,000 t/Year Is the Working Entry Point

Most commercial manure and compost projects in Southeast Asia, Africa, the Middle East and Latin America start between 10,000 and 20,000 tonnes per year. At 300 working days and two 8-hour shifts, a 10,000 t/y plant runs at roughly 2–2.5 t/h. That is small enough to fit a 500–800 m² workshop and a single small dryer, but large enough to supply regional distributors with bagged product twelve months a year.

The number that matters is not the headline capacity. It is the capacity the line holds on the wettest, stickiest raw material your region delivers in the rainy season. Everything below is built around that constraint.

Process Flow and Equipment List

A 10,000 t/y organic fertilizer line has six stages. Skipping any one of them is the most common reason a new plant fails its first granulation test — usually because fermentation was rushed, moisture was never stabilised, or screening was deleted to save budget.

StageEquipmentTypical Specification
1. Fermentation and pre-treatmentCompost turner, hammer mill, ribbon mixer2.5–3.0 m self-propelled turner; 5–8 t/h crusher; 1–2 t batch mixer
2. GranulationDisc granulator or rotary drum granulatorΦ3.2–3.6 m disc, or Φ1.2×4 m drum; 2–3 t/h
3. DryingRotary dryer + hot blast stoveΦ1.2×12 m, inlet 250–350 °C, outlet moisture below 15%
4. CoolingRotary coolerΦ1.0×10 m, discharge within 5 °C of ambient
5. ScreeningTrommel screen2–5 mm mesh, 3–5 t/h, oversize returned to crusher
6. Coating and packingCoating machine + automatic weigher1–2 t/h coater; 2–50 kg bagging with double-scale weighing

Indicative Capex Breakdown

The ranges below describe a standard carbon-steel configuration for a complete line, ex-works. They are budget planning figures, not a quotation: the final number depends on layout, automation level, stainless-steel content, dust-collection standard and destination port.

SectionBudget Range (USD)
Pre-treatment (turner, crusher, mixer)18,000 – 35,000
Granulation (disc, drum or roller press)12,000 – 45,000
Drying and cooling with hot blast stove28,000 – 60,000
Screening and coating8,000 – 16,000
Packing machine6,000 – 15,000
Conveyors, dust collection, steel structure10,000 – 22,000
Electrical, PLC, installation materials6,000 – 14,000
Total equipment88,000 – 207,000

Operating Cost per Tonne

Operating cost decides whether the plant is profitable; capex only decides how fast you get there. Drying fuel is the single largest lever, and it is the line item most often underestimated.

Cost ItemUSD per Tonne of Product
Raw material and fermentation loss (10–15% mass loss)10 – 40
Electricity (28–35 kWh/t)3 – 5
Drying fuel (coal, gas or biomass)8 – 25
Labour (4–6 operators per shift)6 – 10
Bags, pallets and packaging5 – 12
Maintenance and spare parts3 – 6
Total operating cost35 – 98

The Payback Math, Honestly

Bulk granular organic fertilizer typically leaves the plant gate at 120–220 USD/t, depending on nutrient content, packaging and the local distribution chain. Subtract the operating cost range above and the gross margin lands between 40 and 120 USD per tonne.

  • At a conservative 50 USD/t margin and 70% utilisation in year one: roughly 350,000 USD gross profit — the line pays for itself in about 9–14 months.
  • At 80 USD/t and 50% utilisation (a realistic first-year ramp): roughly 400,000 USD — payback in 8–12 months, before working capital.
  • Add feedstock contracts, licensing, workshop construction and 3–6 months of bagged inventory, and a realistic full payback sits at 18–30 months from first shipment.

Anyone quoting a 6-month payback is pricing your output at retail and your downtime at zero.

Five Variables That Move the Budget Most

  1. Raw material moisture. Fresh manure at 60–70% moisture needs more fermentation bays and a larger dryer; composted input at 30–35% cuts dryer size and fuel by a third.
  2. Granulation route. Disc is the cheapest to buy, drum gives harder granules, roller press removes the dryer entirely for dry and heat-sensitive formulas.
  3. Drying fuel. Biomass or coal-fired hot blast stoves are the low-capex choice; gas trains add cost but cut labour and emissions paperwork.
  4. Automation level. Automatic batching and bagging add 15–25% capex but remove two operators per shift and stabilise formula accuracy.
  5. Dust and noise standard. A pulse bag dust collector and enclosed crusher are often mandatory for permits in urban industrial zones; retrofitting later costs more than including them now.

Next Step

Send us your raw material type, target output and local fuel price, and our engineers will return a priced equipment list plus a plant layout drawing sized to your workshop. You can review our organic fertilizer production line configurations and finished reference projects before the first call.

Events
Contacts
Contacts: Miss. Judy
Fax: 86-371-64865777
Contact Now
Mail Us